$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
$16.99 - $19.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.
A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.
$49.99 - $54.99
Lezyne's Alloy Drive mini-pump quickly inflates your tires so you can get back on your bike. Its CNC-machined aluminum barrel and handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta and Schrader compatible Air Bleed System Flex Hose that stows inside the handle when not in use.
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge
$49.99 - $54.99
Lezyne's lightweight, powerful Pressure Drive mini-pump quickly inflates your tires so you can get back on your bike. Its aluminum barrel and handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use. - Small: 170mm, 89g - Medium: 216mm, 102g *Note: Blue color not available in the United States
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
The Digital Shock Pump gives you an exact pressure setting to make suspension and seatpost setup easier and repeatable every time. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - LCD display panel - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder and foldable hose
High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
$20.99 - $26.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
An update to our hugely successful digital shock pump, this new version retains the slanted gauge and exclusive bleeding system for accurate and consistent pressures, but adds a new display cover and is redesigned to be smaller and lighter. It's perfect for the glove box or backpack. - Slanted gauge for ease of use - Exclusive bleeding system - Smaller format and lighter package
Our Boundary 1.5HP is designed for the high pressure of road tires and is capable of reaching 120PSI / 8.3 bar. An extendable head means it's easier to pump, and the sealing lever doubles as a protective cover to keep it functioning no matter the conditions. An additional sleeve seals the barrel to prevent water penetration. - Alloy barrel and handle - High-pressure road optimized - Built-in extendable head
Our High Volume Boundary 1.5HV pump is designed for mountain bikers who need larger delivery of air for big tires. An extendable head means it's easier to pump, and the sealing lever doubles as a protective cover to keep it functioning no matter the conditions. The frame bracket has been optimized for recessed frame down tube. - High-volume construction optimized for mountain bikes - Innovative sealing lever doubles as protective head cover, protecting against water and dirt - Extractable head reduces the risk of damaging valve stem during inflation
The Boundary 2.0HP is a dedicated high-pressure mini-pump. Thanks to a tapered barrel, it can inflate a road tire in no time flat and comes with a retractable hose and a reversible Presta/Schrader head with sealing lever. - High-pressure road optimized - Built-in extendable head
Our High Volume Boundary 2.0HV pump is designed for mountain bikers who need larger delivery of air for big tires. An extendable head means it's easier to pump, and the sealing lever doubles as a protective cover to keep it functioning no matter the conditions. The frame bracket has been optimized for recessed frame down tube. - High-volume construction optimized for mountain bikes - Innovative sealing lever doubles as protective head cover protecting against water and dirt - Extractable head reduces the risk of damaging valve stem during inflation
Simple and effective, our new entry level shock pump does it's job every time—perfect pressure setting in an easy-to-use package. - Easy-to-use gauge - Easy and accurate operation
The Boundary CO2 offers a fast and efficient method to re-inflate your tire in an emergency. The valve is protected to avoid accidental engagement and our design allows you to easily control the rate and flow of CO2. The pack contains a 16g cartridge. - Two-step setting, with air-flow adjustment thanks to dedicated knob - Integrated dust cover - Compatible with threaded cartridges - Alloy body and knob, composite cover - Pressed-in Presta/Schrader - Approximate Weight: 88g - Includes a 16g cartridge
The FP 1.0 Floor Pump is precision crafted from high-grade aluminum to produce a lightweight, functional pump for daily use. The ergonomic, wide handle provides the needed leverage to inflate tires quickly and with ease, while the dual-valve Presta and Schrader screw-on T-head and three-inch dial allow for accurate inflation of a variety of tires.
The FP2.0 Floor Pump is precision crafted from high-grade aluminum to produce a lightweight, functional pump for daily use. The ergonomic, aluminum handle designed into a delta shape provides the needed leverage to inflate tires quickly and with ease. While the head fits both Presta and Schrader, a three inch dial allows for accurate inflation of all tires you may encounter. - Ergonomic composite handle with integrated head mount - Top mounted 2.5" gauge with air bleeding button - Wide and stable steel base - Auto Head Presta/Schrader - 160PSI / 11 Bar - Dimensions: 66cm - Air volume per stroke: 360CC
The Syncros HV Micro-Floor is midway between a workshop floor pump and a mini-pump. It can easily fit in All-Mountain backpack to suit any MTB rides while you will always have a free space in your hand luggage to fit the Micro-Floor pump to be sure you don't go on a road training weekend without it. It comes with a reversible valve to fit both Presta and Schrader valves. - A travel floor pump with a stowable foot pad - Backpack-friendly size - Extra long hose for easy trail-side inflation - Floor pump construction offers the best inflation performance for high-volume and high-pressure tires - Single, simplified storage for the head and hose
The Vernon 2.0 HV is a mountain-bike-specific pump that is designed with an extra-high-volume barrel to deliver more air with fewer strokes. A steel and composite construction produce a lightweight but durable product that will always fill you up and never let you down. MATERIAL: Steel barrel and base, composite handle VALVE TYPE: Reversible Presta/Schrader, with sealing lever MAXIMUM PRESSURE: 180PSI / 12.4 bar FEATURES - 32mm barrel capable to inflate both road and mountain bikes - Ergonomic composite handle with an integrated head mount - Top mounted Digital gauge for accuracy with bleed button - Wide and stable steel base
The first pump offering function and accuracy at low and high pressures. With its two air chambers, our Vernon 2.0 Dual Floor Pump is the ideal pump for riders with multiple bikes. Simply flip the gauge to your preferred discipline. In MTB mode the pump delivers a high volume of air with a gauge that is calibrated to show up to 40PSI / 2.8 BAR to allow for accurate pressure. In Road mode, a second chamber is engaged to provide air at high pressure. In this mode, you can reach 160PSI / 11 BAR. The gauge is positioned beside the ergonomic handle to allow for easy reading of the desired pressure. - Steel barrel and base, composite handle with bleed button - Valve Type: Flip head Presta/Schrader, with sealing lever - Maximum Pressure: High volume / MTB = 40PSI, High pressure / ROAD = 160PSI - The first pump with 2 modes optimized to inflate road and mountain bike tires - Dual face gauge, 40PSI/2.8Bar for Mountain bikes, 160PSI/11Bar for road bikes - Flipping the gauge face activates the bigger or smaller pump barrels to reach high volume for mountain bikes tires or high pressure for road tires - Integrated handle with head dock for locking and protection - Reversible head with integrated air bleeding button - Wide and stable steel base - Flippable gauge for high volume MTB or high-pressure Road delivery. - Dimensions: 675mm - Air Volume Per Stroke: High volume / MTB = 784cc, High pressure / ROAD = 327cc
Our workhorse floor pump features a stable and strong steel barrel and base with a composite handle. Presta- and Schrader-compatible, we integrate a sealing lever for simplicity. The robust gauge is positioned at the top of the pump for easy reading of the pressure, whether for road or MTB. - Steel barrel and base - Composite handle - Compatible with road & MTB tires
Our entry-level floor pump is perfect for the rider looking for a cheap but dependable floor pump. Its compact size and robust design are perfect for storing inside the trunk of your car or inside your garage. - Solid construction - Accurate, easy-to-read gauge
Our two-function Vernon 3.0 pump is focused on inflating high-volume MTB tires but also on making what can be a tricky job easy: seating tubeless tires. The pump features a specific head to rapidly deliver a huge shot of air to rapidly seat the tire against the bead. The gauge is large and mounted to a wide and stable base for ease of use and optimal air delivery. . - Optimized for Tubeless tire installation - 3" base-mounted gauge - Ergonomic composite handle - Wide and stable composite base - Valve core remover and Presta to Schrader adaptor included
Lightweight and integrated, out iS (Integrated Storage) Cache Cage is designed to keep you moving in the event of a trail side mishap. An inflation device, multitool (with chain tool) and bottle cage all integrated into one unit, there for when you unfortunately need it. The Cage features a neat flippable wing so it can be set for left or right hand users (or reversed for Seat tube mounting). The design is side entry so it will fit in tight spaces on full suspension frames and it's lightweight so you can use it on your cross country race bike. It's also designed to work perfectly with the new Scott Spark which features a recessed section on the downtube. The multi-tool features 8 forged and machined bits and we've added a corrosion resistant coating for longevity and protection. The slim chain tool mounts to the multitool for maximum weight savings and ease of use. The pump is MTB optimized for large volume delivery to get your tire back up to pressure fast. - Our lightest & slimmest integrated MTB solution yet - Easy-to-use chain tool for trailside repair - Side-entry bottle cage - Flippable wing for left- or right-handed use - Optimized fit for recessed frame down tubes - High bottle retention - Functional, high-volume MTB pump - Glass Fiber reinforced Nylon - steel tool plate / Hardened steel bits - T30/T25/Hex8/Hex5/Hex4/PH2/Chain tool/Chain link holder - 245g - MAXIMUM PRESSURE: 70PSI / 4.8 bar - AIR VOLUME PER STROKE: 67cc
Lightweight and integrated, our iS (Integrated Storage) Cache Cage is designed to keep you moving in the event of a trail side mishap. An inflation device, multitool (with chain tool) and bottle cage all integrated into one unit, there for when you unfortunately need it. The Cage features a neat flippable wing so it can be set for left or right hand users (or reversed for Seat tube mounting). The design is side entry so it will fit in tight spaces on full suspension frames and it's lightweight so you can use it on your cross country race bike. It's also designed to work perfectly with the new Scott Spark which features a recessed section on the downtube. The multi-tool features 8 forged and machined bits and we've added a corrosion resistant coating for longevity and protection. The slim chain tool mounts to the multitool for maximum weight savings and ease of use. The CO2 unit is our Boundary CO2 delivery system which offers a fast and efficient method to reinflate your tire in an emergency. The valve is protected to avoid accidental engagement and our design allows you to easily control the rate and flow of CO2. The pack contains a 16g cartridge, but is also compatible with 20g cartridges. - Our lightest & slimmest integrated MTB solution yet - Easy-to-use chain tool for trailside repair - Side-entry bottle cage - Flippable wing for left- or right-handed use - Optimized fit for recessed frame down tubes - High bottle retention - CO2 nozzle with air flow adjustment and 16g CO2 cartridge - Glass Fiber reinforced Nylon - steel tool plate / Hardened steel bits - T30/T25/Hex8/Hex5/Hex4/PH2/Chain tool/Chain link holder - 230g
Our iS (Integrated Storage) solution for road and gravel riders, the iS Coupe cage is a top entry cage which can be mounted anywhere on the bike. The 10 function multi-tool is securely housed behind the bottle and features a special finish for higher resistance to corrosion. The tool itself has 10 function to help you get over basic trail side disasters. The HP pump stands for High Pressure. Road pumps need high pressure capabilities at a low volume to enable you to pump to the higher pressures of road tires. - Integrated storage top entry cage - Upgraded bit finish for higher resistance to corrosion - 10-function multi-tool - Low profile design mounts seamlessly to the downtube or seatube - High pressure road pump - Glass Fiber reinforced Nylon - Hardened steel bits - Hex2/2.5/3/4/5/PH2/FLAT/T10/20/25 - 2 bit adaptors : Hex 8mm / T30 - 120PSI / 8.3 bar - 194g approximate weight
- For use with Bontrager CO2 cartridges - Regulator design provides safe, controlled operation - Reusable cartridge insulator keeps hands protected while inflating - Compact and lightweight design is easy to store for any ride - Spring-loaded mechanism regulates airflow for both Presta and Schrader valves
A clever, compact mini pump with hidden hose, pressure gauge, and concealed CO2 inflator. Designed with a chamber for higher-pressure tires, Air Rush Pro Mini Pump is a premium option for quick and easy manual inflation up to 100 psi—or use the included inflator found tucked inside the handle for effortless CO2 inflation. While not in use, Air Rush Pro stows easily in a jersey pocket or mounts cleanly under a water bottle cage with the included bracket. Product details - Two-in-one design combines CO2 inflator and mini pump - Flexible rubber hose quickly connects to pump body with magnetic attachment - Hose can be concealed inside pump when not in use - Pump head securely threads onto Presta and Schrader valves - Presta-compatible CO2 inflator securely stored in threaded handle - Folding handle locks into place to add comfort while inflating - Use included bracket for clean mounting that easily fits under bottle cage
Easy inflation The convenience of CO2 with the ever-ready capabilities of a mini pump, the Air Rush Road combines safe, controlled CO2 inflation with the back-up security of a telescoping pump. At just 72g, the Air Rush's compact design easily fits in a jersey pocket or seat pack. Product details - 2-in-1 design combines CO2 inflator and mini pump - Ultra-compact size easily fits in a jersey pocket or seat pack - Includes reusable cartridge insulator to protect hands - Pump inflates tires if you're out of CO2 - 72g - Includes two 16g cartridges, mounting bracket, and required hardware
Show flats no fear with Bontrager's Air Support pump. Built for the lower-volume tires on your commuter, cruiser or town bike, but can handle road and mountain tires, the Air Support is great for topping off your pressures or fixing that unfortunate flat. The auto-select head uses a fold-out lever to lock securely to Schrader or Presta valves for quick and easy inflation up to 80 psi.
Bontrager's Air Support Road hand pump is a highly durable pump with a small volume chamber for quick inflation of higher-pressure tires up to 115 psi. The fold-out lever locks the pump head securely to the valve for consistent airflow into the tire. Use the included bracket to easily mount it under your bottle cage. Available in two lengths: Long for more air per stroke, or Short for an easy fit into a jersey pocket.
Bontrager's Air Support HV is a life-saver when you flat out on the trail. A large volume chamber makes it a breeze to use on fat mountain bike tires. It has an easy-to-use thumblock, an auto-selecting head that fits Presta and Schrader valves, plus a fold-out T handle and a dual action for fast inflation. The Air Support HV is compact and light and it comes with a mount to carry it on your frame.
A compact mini pump that easily packs in your jersey pocket or bag and quickly inflates larger volume tires. Packable and powerful The Air Support HV Pro easily packs into a jersey pocket, bag, or pack and provides easy, accessible inflation for larger volume tires. An extendable air hose helps eliminate stress at the valve stem and a larger chamber allows for quick inflation up to 60 PSI. This refined mini-pump features a polished silver finish and comes with an on-bike mount. Product details - High volume air chamber for larger volume tires - Inflate to 60 psi (4.15 bar) with little effort - Extendable, hidden hose reduces stress at valve - Mounting bracket fits easily under bottle cage - Designed to work with Presta valves
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more
Similar to an accurate chain checker, this tool is designed to give you a quantitative measurement on exactly how worn your Bontrager tires are. Use this highly accurate gauge with the chart in the product image, which shows Bontrager's minimum recommended tread depth. - Dial gauge designed to precisely measure Bontrager tire wear - Use in conjunction with the chart in product image to know minimum tread depth - The tire should be measured on the center knobs with multiple points taken - The perfect tool to prove how worn a tire is and thus replace at the proper interval
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. - TyreWiz is the first real-time tire pressure sensor for bicycle riders - Designed for all bike riders, regardless of their experience or bike’s intended use - Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant - Data can be read on a cycling computer or smartphone with the app for iOS and Android - Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts - Retail package includes two sensors, batteries, and a valve core removal tool - Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions - Include LED lights to indicate when pressure is outside the target range - Designed for road and mountain bike riders - Personalized tire recommendations in the smartphone app for iOS and Android - NFC pairing for fast and easy connection by BLE to a phone - Data reported with +/- 2% accuracy at .1 PSI resolution - Broadly compatible with tires that use a removable Presta-style valve core - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours - IPX7 dustproof/waterproof rating - Box includes valve core removal tool for installation
Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)
Keeping your bike's tires properly inflated is the best way to ensure a happy ride. Maintain pressure and avoid pinch flats with MSW AirLift Floor Pumps. - Smart head fits on both Presta and Schrader valves - Steel barrel and steel base - Bleed valve for fine-tuning pressure - Max pressure: 150 psi - Extra-long 48-inch hose - 2.5-inch diameter gauge - Hidden inflation adapter kit for toys, balls & rafts - Overall height: 25-inches
20g CO2 cartridges contain a mid-sized charge suitable for higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").
Lezyne's Gauge Drive HP is a compact hand pump made of custom CNC machined aluminum for precise, lightweight construction. This high-pressure pump design easily inflates road tires to riding pressure with fewer strokes. The overlapping handle and barrel are integrated into a compact design. It comes equipped with Lezyne's ABS Pen Gauge, a compact in-line pressure gauge compatible with Presta and Schrader valves.
The Gravel Digital Drive is a high-quality bike floor pump with a medium-sized barrel designed specifically for gravel bikes and other mid-volume tires. The chuck is tubeless specific and “flips” for Presta, or a threaded Presta shaft (with the valve core removed) to provide more airflow for seating tubeless tires. Its barrel and piston are built from high-grade, durable steel and mounted to a rugged Composite Matrix base. Pumping is versatile and more efficient thanks to an extra-long hose and a larger 3.5” (88.9 MM) digital gauge, which provides precise measurement up to 100 PSI (6.9 BAR). And its classic wood handle is stylish and very comfortable to use. The Gravel Digital Floor Drive is built in-house, 100% quality controlled and fully rebuildable for long-lasting operation. - CNC-machined aluminum construction - Precision 3.5-inch digital gauge (100 psi / 6.89 bar) - Extra-long nylon-reinforced braided hose with aluminum couplers - Varnished wood handle - ABS1 Pro with Presta / valve stem chuck
Page 1 of 2 Next page