Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Cranksets

Wheels Manufacturing Inc. 386 EVO Adapter for 24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers
Wheels Manufacturing Inc. BB30 Adapter for 24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BBright Adapter for 22/24mm Spindle Cranks
$50.00
The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr
Stages Cycling Shimano Ultegra 6800
$579.99
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
Shimano GRX RX600 11-Speed Crankset
$146.99
Shimano's new FC-RX600-11 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding, with tighter gear steps for maintaining optimum pedaling cadence. The 2x11-speed crank is available in a 46-30T or 40T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T, 40T
Shimano Tiagra Front Chainwheel
$128.99 - $137.99
Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB
Shimano Ultegra R8000 Crankset
$270.99 - $276.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
Shimano XT M8100 Boost Crankset
$154.99
The Shimano Deore XT FC-M8100 crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Hollow, forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. - Features 52mm chainline designed for Boost spacing - 172mm Q-factor - Pedal Spindle: 9/16" - BB Included: No - Chainring BCD: Direct Mount - Crank Intended Use: Mountain - Drivetrain Speeds: 12 - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs - Chainring sold separately
Shimano XTR Hollowtech II M9120-1 Crank Arms
$419.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor
SRAM Force DUB Crankset
$420.00
Riders want more range and closer steps between gears—and that’s the driving design principle of the SRAM Force crankset. It offers smaller chainrings with a consistent 13-tooth gap between size variants, delivering smooth, accurate, and dependable shifting for the modern rider. Always find the sweet spot. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter
SRAM RED 11-Speed Crankset
$394.99 - $476.00 $406.00 - $476.00 Up to 10% Off
Already a legend in its time, the SRAM RED crankset is now available with refreshed graphics to complement the SRAM RED eTap componentry. The SRAM RED crankset features a completely hollow construction all the way to the spider. Its hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. As always, for seamless, flawless performance and Yaw compatibility, pair this crank with X-GlideR chainrings. - SRAM Road 11-speed compatible - Compatible with SRAM RED eTap components - Exogram technology uses a large, hollow cross section all the way to the spider, minimizing weight while maximizing stiffness - SRAM's stiffest crank ever - Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance - Stiffer X-GlideR chainrings feature thicker construction and advanced shift timing pins and ramps, which are optimized for shifting with the Yaw front derailleur - Arm Material: Carbon - Chainring Material: Machined alloy - Weight: 557 grams (BB30 172.5mm 53x39 BB not included) - Compatibility: SRAM RED & SRAM Force Yaw Front Derailleur, SRAM RED 22 & PC1170 chains - Finish: Carbon - Bottom Bracket Compatibility: BB30, PressFit 30
SRAM X1 1400 Crankset
$261.99 - $308.00
SRAM's X1 Crankset takes a less-is-more approach to mountain bike shifting. Paired with SRAM's 1x11-speed parts (sold separately), you get the gearing of a double or triple drivetrain, with greater simplicity, less noise, and reduced weight. There's less clutter on your bars without a front shifter and cable, and dropped chains and chainguides are a distant memory thanks to the ingenious X-Sync chainring teeth that hold your chain. On top of all that, the cranks themselves are seriously light thanks to the hollow-forged 6000-series aluminum arms and spider. Experience less with X1, because less is more.
SRAM XX1 Carbon Eagle DUB Boost Crankset
$515.00
The XX1 Eagle DUB crankset has been re-examined and re-engineered. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Carbon-tuned lay-up crank design provides extreme stiffness and light weight - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Boost Compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
SR Suntour XCM-T Crankset
$35.00
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
Race Face 2005-2007 Deus and Cadence Crank Bolt/Puller
$8.99
Race Face aluminum crank bolt/puller for Deus and Cadence cranks.
Race Face Alloy Crank Boot
$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Race Face Carbon Crank Boots
$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Quarq DFour Power Meter Crankset
$1,179.00 - $1,179.99
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DFour measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DFour represents the state of the art in power meter technology. Every innovation in Quarq’s next-generation DZero platform is channeled into the DFour Power Meter Crankset. It embodies 10 years of Quarq technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app and compatibility with BB386EVO bottom brackets. - The DFour power meter is a bolt-on upgrade for Shimano’s 11-speed Dura-Ace 9000, Ultegra 6800 and 105 5800 drivetrains. - Must be paired with a compatible SRAM bottom bracket. - ELSA RS power meter owners can upgrade using the DFour Power Meter Spider. - Free firmware upgrades with the Qalvin app. - Compatible with BB30 bottom bracket. - BB30 versions ship with the spacers and wave washer required for BB386EVO installation.
Quarq DFour91 Power Meter Chassis
$1,179.00 - $1,179.99
Every innovation in Quarq’s next-generation DZero platform is channeled into DFour: 10 years of Quarq advances in power meter technology, plus new features such as dual Bluetooth low energy and ANT+ wireless data transfer, revised circuitry, a new strain gauge design and the new Qalvin BLE app. The DFour91 is designed for Shimano’s Dura-Ace R9100 chainrings. It uses Quarq’s lightweight, sturdy ExogramTM carbon crank arms. GXP and BB30 versions work with every bottom bracket shell, including BBright and BB386EVO. - DFour is designed for Dura-Ace 9000 chainrings and compatible with Ultegra 6800 and 105 5800 chainrings - DFour91 is designed for Dura-Ace R9100 chainrings - Must be paired with a compatible SRAM bottom bracket - 8-bolt power meter owners can upgrade using a DFour or DFour91 power meter spider - Bluetooth low energy technology and ANT+ wireless data transfer - AxCad -- no cadence magnet required - 10K Temperature Compensation - Battery — CR2032, 200-hour battery life, change without tools - OmniCal — swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy — within 1.5%, measuring both legs - Chainrings and bottom bracket sold separately
MRP 1x V3
$69.95
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
FSA Energy 386EVO Crankset
$249.99 - $264.99
Energy modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO spindle, this modular system will fit a wide variety of frames with a range of BB standards. - AL-7075, CNC-machined Super outer chainring - AL-7075, CNC-machined Pro inner chainring - Hollow-forged AL-6061-T6 crankset - Chromoly bottom bracket spindle - Compatible with Shimano/SRAM/Campagnolo 10- & 11-speed drivetrains
FSA Vero Compact Crankset
$84.99
FSA's Vero Compact Crankset features a ramped and pinned alloy outer chainring with a tough chromoly inner chainring. And, its cold-forged aluminum crankarms are stiff and lightweight with ankle-friendly countours. - Shimano/SRAM 9-speed compatible - Spindle interface: Square Taper JIS - Weight: 688g
Campagnolo Potenza 11 Crankset
$300.00
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
Wheels Manufacturing Inc. 386 EVO Adapter for 22/24mm Spindle Cranks
$50.00
The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 22/24mm Spindle Cranks (SRAM/TruVativ)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB/PF30 Universal Adapter for 24mm Spindle Cranks (Shimano, FSA, etc.)
$40.00
Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30
Wheels Manufacturing Inc. BB30 Adapter for 22/24mm Spindle Cranks
$40.00
Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wheels Manufacturing Inc. BB30a/PF30a/BBright Adapter for 24mm Spindle Cranks
$50.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr
Wheels Manufacturing Inc. PF30 Adapter for 24mm Spindle Cranks
$40.00
The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter
TruVativ Stylo Carbon Eagle 5-inch Fat Bike DUB Crankset
$310.00
The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs
Shimano 105 R7000 Crankset
$157.99
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
Shimano Alivio M4050 Triple Crankset
$81.99
Shimano's 9-speed Alivio Crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. Plus, the chainrings shift super-quick and precise. - BB Included: No - Chainring BCD: 96/64mm - Chainrings Included: Yes - Crank Intended Use: Mountain - Drivetrain Speeds: 9 - Pedal Spindle: 9/16-inch - Spindle Diameter: 24mm - Spindle Interface Type: Shimano Hollowtech II
Shimano Alivio T4010 Crankset
$62.99
The Shimano Alivio FC-T4010 crankset is an excellent replacement for your 9-speed triple chainring drivetrain. - Chainguard included - For Octalink V2 bottom brackets
Shimano Alivio Triple Octalink Crankset (40/30/22)
$57.99
Shimano's 9-speed Alivio Crankset is a solid replacement for your tired, worn-out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. Plus, the chainrings shift super-quick and precise. - BB Included: No - Chainring BCD: 64 , 104 - Chainrings Included: Yes - Color: Black - Crank Intended Use: Mountain - Defined Color: Black - Drivetrain Speeds: 9 - Compatible with 9-speed chains - Number of Chainrings: Triple - Pedal Spindle: 9/16" - Rings: 40/30/22 - Spindle Diameter: not_included - Spindle Interface Type: Shimano Octalink V2
Shimano Altus M311-L Crankset
$33.99
Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS
Shimano Altus M371 Crankset
$48.99
The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings. - Chain guard included - 9-speed
Shimano Claris R2000 Double Crankset
$80.99
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt - 150mm Q-factor
Shimano Claris R2030 Triple Crankset
$91.99
Claris R2000 series cranks are clean and stylish; an ideal option for long touring, town cruising, and daily commuting. - Hyperglide technology ensures smooth and reliable shifting - 4-gear arm crank design - Includes crank arm fixing bolt
Shimano Deore Hollowtech II M6000-2 Crankset
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The smooth shifting rhythm allows you to maintain speed and acceleration over challenging terrain. Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance. Features: - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Close step tooth profile for smooth shifting - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8
Shimano Deore Hollowtech II M6000-3 Crankset
$124.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50
Shimano Deore M6000-B2 Boost Crankset
$126.99
Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. The close step tooth profile allows for smooth shifting so you can maintain speed and acceleration over challenging terrain and hollow-forged crankarms transfer your power quickly and smoothly to the rear wheel. Features: - Chain Line 3mm Outboard Crankset (2x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Optimized gear combinations and ratios for trail riding - Stable shifting performance in any suspension position - Single spike structure for stable shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 51,8
Shimano Deore XT Crank (Double)
$219.99
- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-2 - Series : DEORE XT - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Crank Arms : HOLLOWTECH II Technology - Bottom Bracket : BB-MT800 / BB-MT800-PA - Chain Line : 48.8mm - BB Shell Width : 68, 73mm
Shimano Deore XT Crank Arms
$144.99 - $149.99
- Aluminum crank arm and spider with steel spindle - 4 bolt spider compatible with all XT 8000 series chainring configurations - Hollowtech II crank arm construction - Steel driving gear teeth and aluminum support gears - 96mm P.C.D. - 176 Q-Factor, 53.4mm OR 50mm chainline - BB Included: No - Chainrings Included: No
Shimano Dura-Ace 9100 11-Speed Crankset
$594.99
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
Shimano GRX RX810 11-Speed Crankset
$224.99
Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T
Shimano Sora Four-Arm Crankset
$99.99 - $113.99
- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD
Shimano XTR Hollowtech II M9100-1 Crank Arms
$419.99
Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 162mm Q-Factor
Shimano XTR Hollowtech II Race Crankset
$577.99
Shimano's heralded XTR moniker promises genre-defining performance, weight, and style. Shimano's XTR Hollowtech II Race Crankset lives up to the name. The hollow, cold-forged aluminum crankarms are ultra light, yet exceptionally stiff for awesome power transfer and efficiency. XTR chainrings feature computer-designed shift ramps for remarkably fast, clean, and precise front shifting. CloseStep gear combos allow riders to tailor the chainring combos to suit their riding needs.
Shimano XTR Hollowtech II Trail Crankset
$405.99 - $577.99
Shimano's heralded XTR moniker promises genre-defining performance, weight, and style. Shimano's XTR Hollowtech II Trail Crankset lives up to the name. The hollow, cold-forged aluminum crankarms are ultra light, yet exceptionally stiff for awesome power transfer and efficiency. XTR chainrings feature computer-designed shift ramps for remarkably fast, clean, and precise front shifting. CloseStep gear combos allow riders to tailor the chainring combos to suit their riding needs.
SRAM EX1 Crankset
$55.00
Lightweight, durable, stiff and designed specifically to work with Bosch and Brose mid-ship motors, SRAM's EX1 crankarms are purpose built for the high-torque E-MTB environment. - Proven SRAM technologies adapted for the demands of midship-motor E-MTBs - Compatible with Bosch, Brose and Yamaha bottom bracket interfaces - Arm Material: Aluminum - Colors: Black - Bottom Bracket Interface: ISIS
SRAM Force 1 Crankset
$266.99 - $276.99
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included
SRAM GX Eagle DUB 4-inch Fat Bike Crankset
$145.00
The SRAM GX Eagle DUB Fat Bike crankset delivers consistent performance every time out. Featuring SRAM's DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000-series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 7000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 170/177 Hubs
SRAM GX Eagle DUB 5-inch Fat Bike Crankset
$185.00
The SRAM GX Eagle DUB Fat Bike crankset delivers consistent performance every time out. Featuring SRAM's DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 7000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: Sram Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 190/197 Hubs
SRAM GX Eagle DUB Boost Crankset
$135.00
The SRAM GX Eagle DUB crankset delivers consistent performance every time out. Now featuring SRAM's DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 7000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 7000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12 , 11 , 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 141/148 Boost Hubs
SRAM GX-1000 1x Crankset
$117.00
SRAM's GX-1000 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Compatible with X-Sync chains - 6000 series AL - CNC machined 7075, two-tone anodized X-Sync chainring - Bottom bracket configurations: BB30, GXP, and Fat Bike GXP - Compatibility: Boost 148 hub or standard hub - Bottom bracket sold separately
SRAM GX-1000 2x10 Crankset
$131.00
SRAM's GX 2x10 Crankset delivers consistent performance every time out. Featuring SRAM’s X-Glide chainrings, the GX crankset is engineered for 2x10 shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-Glide puts you in the right gear, right now. - 10-Speed - 6000 series AL - X-GLIDE 2x10 shifting technology - Fat Bike GXP: 100mm spindle
SRAM GX-1000 2x10 Crankset w/All Mountain Chainguard
$131.00
SRAM's GX 2x10 Crankset w/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x10 shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. - 6000 series AL - X-GLIDE 2x10 shifting technology • Weight: 799g (GXP, 175mm, 36/22T) • Chainguard included, but not shown
SRAM GX-1400 2x11 Crankset
$181.00
SRAM's GX-1400 2x11 Crankset delivers consistent performance every time out. Featuring SRAM’s X-Glide chain rings, the GX crankset is engineered for 2x11-speed shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-Glide puts you in the right gear, right now. - 11-speed - Open Core and X-Glide technology - CNC machined 7075, two-tone anodized X-Sync chainrings (36/24T) - Weight: 727g (GXP, 175mm)
SRAM NX 1x X-Sync Crankset
$125.00
The SRAM NX crankset provides high performance at the right price. Featuring the SRAM engineered X-SYNC chainring, the NX crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. Personalize your gearing with five available chainrings. - 6000 series aluminum arms - BOOST 148 compatible - Fully compatible with all SRAM 1x drivetrains - Arm Material: Aluminum - Chainring Material: Aluminum - BCD: 94mm - Weight: 680–780 grams - Interface: 24mm *Bottom bracket sold separately
SRAM NX Eagle Boost DUB Crankset
$105.00
The SRAM NX crankset delivers Eagle styling and performance to the newest addition to the Eagle ecosystem. Designed for SRAM's X-SYNC 2 chainrings, the NX crankset is engineered for complete chain control—each tooth's profile is precisely engineered to work quietly, efficiently, and securely with the Eagle chain's inner and outer links. DUB technology features a better-engineered bottom bracket and a new spindle design, which together allows for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of performance and durability. - 6000 series forged aluminum arms - 52.0mm chainline
Page 1 of 2 Next page