Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Zipp Bearing Grease
$12.00
Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.
Zipp Cognition Grease
$43.00
Zipp Speed Weaponry Cognition Grease - For service of Cognition hubs
Zipp QuickView TT Computer Mount
$21.99
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Yakima CrashPad Tailgate Pad
$89.00
- Load your bike hassle-free on your tailgate - High-density foam and ballistic nylon construction protect your truck and bikes - Medium and large sizes to fit all common pickups - Foam conforms easily to most tailgate shapes and provides superior fit
Yakima Getaway Hitch Lock
$15.00
Body for HitchLock. Requires SKS lock core. (Sold Seperately)
Yakima HitchLock
$29.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
Yakima SKS Lock Cores (4-Pack)
$60.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SwingDaddy Hitch Rack
$398.99
•Swings away with bikes loaded to provide ultimate access to vehicle. •No garage required with the single bolt assembly. We've made it really easy and even included the wrench. •New zero-hassle ZipStrips secure your bike to the rack (we've thrown in a few extras for the glove compartment). •Tool-free SpeedKnob quickly tightens and locks the rack to your car. •Anti-sway cradles eliminate bike-to-bike contact. •Lock your bikes to the rack with the HandCuff locking cable (sold separately). •Carries up to 4 bikes. •2" hitch receiver only. •Optional TubeTop (sold separately) allows you to carry a variety of bike frames.
XLAB Carbon Wing Dual Rear Carrier
$185.95
Carry your gear behind you tucked out of the wind with XLAB's Carbon Wing Dual Rear Carrier. This versatile aero add-on provides options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages mount on the outside and tubes can go underneath (all accessories sold separately). The possibilities are endless. You also have 3 mounting options that fit most seats so you can place your bottles just where you want them. And, the Carbon Wing is made of stiff, super-light carbon so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps. It can be used with standard 7mm metal-rail saddles or carbon-rail saddles.
XLAB Mini Cage Pod
$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB Super Wing Dual Rear Carrier
$99.95 - $102.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
XLAB Torpedo Mini Mount Aluminum
$39.95
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Aluminum. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
XLAB Torpedo Mini Mount Carbon
$59.95
Introducing XLAB's latest generation of their Torpedo Mount, the Torpedo Mini Mount Carbon. XLAB's Torpedo Mount lets you carry hydration and computers on your aero bars and actually reduces your aero drag, too! The Mini is narrower to accommodate the trend to running aero extension bars closer together, and it's longer to support XLAB's new horizontal Torpedo bottle (sold separately). Plus it offers high adjustability for easy fitting. Best of all, a designated slot up front allows you to position your computer for easy viewing. No more looking down to see your data! Go with the originators of the horizontal bottle mount; choose the experts: XLAB!
XLAB Torpedo Versa 200
$87.95
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
XLAB Tri Bike Training Strobes
$49.99
XLAB's Tri Bike Training Strobe headlight and taillight is specifically designed to fit on aero seatposts and aero section cowhorn base bars. Don’t be seen without it, because without it, you won’t be seen! Both lights use .5-watt LEDs. The front offers flashing, high- and low-beam settings with run times from 6 to 17 hours. The rear offers flashing and steady settings with run times from 4 to 124 hours. They are water-resistant, plus mounts are included for easy installation.
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
White Lightning Clean Ride
$7.99 - $11.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
White Lightning Clean Streak
$9.79 - $12.99
Clean Streak, Shop Size, 23oz Aerosol - Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
White Lightning Epic Ride
$8.99 - $14.99
White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!
White Lightning Matte Finisher
$8.99
Matte Finisher, 19oz Spray Bottle Matte Finisher delivers a streak-free, gloss-free finish, which helps matte finish bikes look "showroom" new. Also safe for use on clear-coated bicycles.
White Lightning The Trigger
$25.99
Clean your chain in under 20-seconds with White Lightning's The Trigger. Simply close the lid of The Trigger over your chain, spray, and backpedal your chain for about three revolutions. The Trigger comes with one 12-ounce can of Clean Streak so you'll have everything you need for a clean, quiet ride.
White Lightning Wet Ride
$7.99 - $11.99
Rain, sleet, hail, snow, no matter what form it comes in, water can reek havoc on your drivetrain. Fortunately, White Lightning's Wet Ride is designed to meet the demands of riders who traverse soggy terrain and ultra-long distances. This heavy bodied lube is made of premium synthetic oils and water-repelling polymers so it's 100% waterproof and unwaveringly durable. Dirt loving riders will appreciate how well it counteracts the effects of mud and every cyclist will appreciate the anti-corrosion additives that even protect during wet, winter commuting.
Wheels Manufacturing Inc. 29mm SRAM DUB Open Bore Adapter
$8.99
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
Wheels Manufacturing Inc. Bottom Bracket Sealed Bearing Extractor Set
$99.00
- Bearing extractors set for pushing out 22mm, 24mm, and 30mm ID sealed bearings from bottom bracket cups. - Compatible with Wheels Mfg. 1/2" threaded rod press and handles (PRESS-7 and PRESS-7-PRO). BB-EXT Includes (1) 30mm ID sealed bearing extractor (1) 24mm ID sealed bearing extractor (1) 22mm ID sealed bearing extractor (1) 52mm receiver cup (1) 44mm receiver cup sleeve (1) 42mm receiver cup sleeve (1) 39mm receiver cup sleeve (1) bearing pusher shaft
Wheels Manufacturing Inc. Bottom Bracket Socket
$49.00
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
Wheels Manufacturing Inc. Bushing Removal Tool
$60.00
Easy-to-use tool removes and installs replacement bushings in suspension and shock pivots. Includes retaining tool, top cap, and three sizes of bushing drifts. - Fits eyelet sizes - 10mm, 12mm, and 1/2" - Machined aluminum - Anodized Red
Wheels Manufacturing Inc. Double End BB Wrench
$23.50
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
Wheels Manufacturing Inc. Economy Bearing Press
$39.00
An indispensable tool for the serious amateur bike mechanic or smaller bike shop, the Wheels Manufacturing Bearing Press is designed for installation of bottom brackets or sealed bearings with a minimum I.D. of 10mm. - Package includes 2 handles and a 3/8"-12 threaded rod - Economy Bearing Press, used with separately-purchased bearing adaptors
Wheels Manufacturing Inc. Headset Cup Press
$125.00
Wheels Mfg Headset Cup Press is a robust, and easy to use tool made up of two machined aluminum handles, 1/2" threaded rod, and two machined aluminum drifts. One drift is machined with multiple steps to fit common head tube inner diameters. The other drift is two-sided to press in cups with either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd sized sealed bearings. - Machined aluminum handles and drifts - Red anodized drifts and handles - Zinc-plated 1/2" diameter threaded rod - Long threaded rod works with long head tubes up to 250mm - Includes one Head Tube Drift - Includes one Headset Cup Drift - Laser etched for easy identification - Made in the USA
Page 1 of 51 Next page