Shop

BSA is another way of stating English threading. The initialization comes from Birmingham Small Arms, which made bicycles. English threading on road bikes mean a 68mm wide, 34mm inside diameter shell with reverse threading on the drive side. It's the most common threaded standard employed today. This kit works with 24mm diameter cranks, found on cranks from Shimano, FSA, Rotor, and others. Choose between two bearings for the cups. Standard Bearings have low drag thanks to hardened-steel races and our Ceramic balls. Coated Bearings have those same balls installed on coated, hardened-steel races for longer life and less bearing drag. 24mm spindles easily fit through the shell and allow for large bearings to be employed in the outside cups. Put more of your energy into forward motion by reducing frictional drag wherever you can. CeramicSpeed Standard Bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. CeramicSpeed balls are 100% smoother and 15% harder than ceramic competition. The bearings last at least 3x longer than other bearings. In The Box: - 2 threaded cups with bearings - 2 dust covers with built-in spacers - Spacer tube - 10mm syringe of All Round Grease - Sticker sheet

When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths. - Aluminum rim, Hooked / Crotchet tubeless ready - DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel - 370 Hub - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency

The HXC 1501 SPLINE ONE LS are extra lightweight carbon eMTB wheels are engineered for riders looking for outstanding agility. Thanks to the low weight carbon rims, riders benefit from increased agility and dynamism when going uphill and downhill, while withstanding the increased torques of eMTBs. The spokes were designed with specific diameters to align light weight and resistance. Inside the 240 hub, oversized bearings support the additional loads of eMTBs. Each component has been designed with the specific aim of delivering advanced agility to find flow and fun on the trails. - Built to provide ultimate riding agility for light eMTBs - Perfect balance between low weight and resistance, ready to go faster in the ups and the downs - Hybrid-specific spoke design provides an advanced riding experience, combining resistance and lightweight - The 240 Hybrid LS hub features larger bearings for improved durability and rolling efficiency - Ratchet EXP OS, optimized for the requirements of an eMTB, with a bigger threaded ring for direct acceleration through a torque-resistant freehub system

Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem. - Designed for all applications from All MTN to Slopestyle and anything in between - CNC Machined from a solid block of 6061 T6 Aluminum - Exceptionally detailed chamfered edges and channels throughout - 55mm wide clamping platform

36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment

With its unidirectional carbon construction, the SL-K Compact handlebar is ready to race. It features the latest evolution of our compact bar shape, with a shallow 125mm drop and gentle flare. A wide center section gives ample room to mount accessories like GPS units or lights. The areas where the stem and levers clamp have additional reinforcement and a textured finish to avoid slip. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Continuous UD carbon Monocoque construction - Reinforced and textured clamping areas - 120mm wide round center section makes it easy to mount accessories - New internal cable routing options for Di2 - Bar Clamp Diameter: 31.8mm - Bar Reach: 80mm - Cable Routing: Internal - Bar Drop: 125mm - Flare: 4

Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.

- Professional strength cleaner specifically designed to remove grease, oil and other contaminants from electrical components - Unique and proprietary formulation displaces moisture and is completely non-corrosive and non-staining - CFC-free and VOC compliant cleaner safely cleans electrical components, dries quickly and leaves behind no moisture, residue or film

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: -  Two 20 mL syringes -  Two hose assemblies with shutoff clips -  One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems -  One open-ended hose assembly -  Bleed funnel with stopper -  Two 10 mm/12 mm universal bleed blocks -  Two 11 mm bleed blocks -  Two adjustable syringe holders -  M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2) -  M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2) -  M6 x 0.75 adapter — Magura® -  M6 x 1.0 adapters — universal (x2) -  M6 x 1.0 adapter — Promax® -  M7 x 0.75 adapter — Shimano® -  Hose compression sleeve — universal -  Fluid disposal bag -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)

Compatible with Eco Rack - Extra long replacement stays for Eco rack - Length: 15.5"

- Protects key areas from cable rub, rock chips, wear & scratches - Fits all makes, models and sizes - Designed around mountain bike geometry - Frame coverage ~30%. Includes toptube, downtube, 4 stays and extra pieces - Easy install and high durability - Each kit includes installation instructions, cleaning wipe, squeegee, install solution & microfibre cloth - Self-healing. Minor marks and scuffs will disappear with the warmth of a sunny day - A low surface energy means that less dirt sticks to your bike and is easier to clean - 10 year warranty against discoloration and cracking - Available in either matte or gloss finish to match factory paint and is nearly invisible once installed

Replacement Hydraulic Shift/brake Levers - Sram Red Etap Axs Replacement - Hood included - AXS enabled for easy personalization - Lever can be tuned to your preferences with the reach adjust mechanism - Two ports for Blips on each lever

- Race oriented semi-slick tire - Maximum efficiency on light terrain, hard pack, and asphalt - Supple construction for a smooth ride and high puncture protection for tough racing conditions - Super Race construction

- Kits include one pair of end caps - Instructions and hub axle determinations are available online @ www.notubes.com

- Replacement freehub bodies include pawls and springs pre-installed - M-Pulse hubs: six pawls are equipped with Neodymium magnets engaging every 1.66 deg - E-Sync hubs: fast 8.18 deg engagement with reinforced high-torque pawls - HG 11sp road FH body

Small parts for TRP hydraulic disc brake systems.

Fuel EX 9.9 XX AXS is a performance-first trail bike built for riders who have an appreciation for the finest things in life. It combines a cream of the crop carbon frame with top-tier components, from the carbon fiber wheels all the way up to the 150mm Kashima-coated FOX Factory fork, and featherweight, fully wireless SRAM XX transmission. It's a bike that rules the mountain and doesn't hesitate to lay claim to its domain, ripping up rock gardens, blasting berms, and rocketing back to the top to conquer it all once again. It's right for you if... You have refined taste in mountain bikes, and don't like to settle. You want a bike built to tackle the whole mountain and rule it all with the finest technology available, from its light and stiff carbon frame and wheels that track through the hairiest lines, to the FOX Factory fork and SRAM's fully wireless top-tier XX transmission. The tech you get A featherweight OCLV Mountain Carbon frame built to handle the rough and rowdy, a pair of finely laced carbon wheels that track through technical terrain with ease, and SRAM's top-tier XX AXS direct-mount, fully wireless electronic transmission. Plus, you get the silky smooth travel of a 150mm FOX Factory 36 Fork with Float EVOL air spring and GRIP2 damper, 140mm of FOX Factory Float X rear suspension, and a RockShox Reverb AXS dropper post, all topped off with adjustable geometry for fine-tuning your ride to you and internal frame storage that lets you keep your setup tidy without leaving behind trail essentials. The final word Fuel EX 9.9 is a bike built to satisfy those with the finest taste. It pairs together an all-mountain trail capable carbon frame with the finest components you'll find on a modern mountain bike, from its carbon hoops to featherweight wireless SRAM XX AXS shifting. It's all wrapped up with adjustable geometry, so you can fine tune your ride to always feel how you want it. Why you'll love it - Fuel EX Gen 6 gives you 140/150mm of travel with extra adjustability features and more stable handling, plus a more robust frame with internal storage - We expanded our size range to ensure a better fit for all riders, and use the best-fitting wheels for each frame size: XS frames get 27.5" wheels, S frames get to choose between 27.5" or 29" , and sizes M and up get 29" wheels - The new SRAM T-Type transmission delivers next level performance with precise shifts under load and unmatched durability with proven wireless technology. - In-frame storage makes it easy to bring along all of your essentials, while keeping your setup streamlined and sleek - With the adjustable angle headset (angled cups sold separately) and Mino Link, you can choose from six different geometry configurations Features: Internal Storage Internal frame storage makes it easy to ditch the pack and still carry your ride essentials. Active Braking Pivot Active Braking Pivot allows our engineers to tune how the suspension reacts to acceleration and braking forces independently. That means you get more confident control when you need it most. Slack or steep, the choice is yours Install angle adjust headset cups (sold separately) to tweak the 64.5-degree head tube angle a degree steeper or slacker to your liking — all without impacting your bottom bracket height. Adjust the sus for full send Adjust leverage rate with just a flip of a chip. Ride it in the Less progressive setting for a plusher feel perfect for rugged trails with square-edge bumps. Flip it to More progressive when you're hitting big features and don’t want to bottom-out, or when you want to run a coil shock. Transition to transmission SRAM Eagle T-Type transmission mounts directly to the frame, skipping that pesky derailleur hanger of yesteryear. This makes for a more robust system that's not only cleaner looking, it's also more precise under load, and easier to set up. Size-specific stays Size-specific chainstays provide balanced handling to keep the ride nimble for smaller riders and improve front wheel traction on climbs for taller riders. Business in the front, party in the back Craving the nimble ride of 27.5? wheels but don’t want to sacrifice the speed of a 29er? No need to choose. Fuel EX is mullet-ready, just throw Mino Link in high, toss on a 160mm fork, and get ready to party. BITS: Your trailside savior Cleverly integrated into the steerer tube, the included BITS multi-tool has everything you need for trailside adjustments and repairs.

High-quality L-key set with color-coded, convenient plastic sleeve. This ensures that the tool is quickly to hand and the ergonomic and pleasant handle is easy on the hands even at low temperatures. The wear-resistant clip material ensures secure storage of the L-keys as well as simple removal. The Hex-Plus profile offers a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. The ballpoint on the long arm allows dependable working even in difficult installation situations. The BlackLaser surface treatment provides outstanding surface protection, even against corrosion, and a long service life. Laser-engraved and thereby wear-resistant size markings on the L-keys for rapid accessing. - Hex-Plus allows socket head screws to live longer - Hexagonal ballpoint on the long arm - With Take-it-easy tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures

ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

Her' Chamois Butt’r was developed by a female sports medicine physician in cooperation with professional women cyclists. It's a non-greasy skin lubricant that improves your riding comfort by preventing rubbing and chafing. Her' utilizes premium ingredients including aloe vera, green tea leaf extract, tea tree oil, shea butter and lavender oil for their naturally occurring beneficial properties. It's safe for use on even the most delicate fabrics and it washes right off the skin and out of shorts easily with soap and water. - To use: rub 1/6 to 1/3 ounce on your skin or chamois - No gluten, paraben, fragrance or artificial color - Meets the FDA’s Good Manufacturing Practices - No animal testing utilized

Precise electrolyte replenishment - Full-spectrum formula - Rapidly assimilated - Versatile dosing BENEFITS: Meet your precise electrolyte needs with our original full-spectrum formula. A balanced blend of sodium chloride, potassium, calcium and magnesium ensure proper function of all body systems. The low sodium chloride content complements a healthy, low-salt diet. Fine-tune your dosage as needed, capsule by capsule, without fear of overconsumption of salt. - Kosher Certification - Endurolytes is certified by Informed Choice and Informed Sport.

Created for daily training and competition, GU Energy Chews pack energy-dense calories in a portable packet to help sustain energy demands of long duration activities. The 90-calorie packet contains carbohydrates to keep you fueled while delaying bonking by sparing your glycogen stores. Sodium, the primary electrolyte lost in sweat, aids in hydration by maintaining water balance. The branched-chain amino acids (leucine, valine, isoleucine) may reduce mental fatigue and decrease muscle damage.

Fuel for Every Day A thin layer of honey sandwiched between two thin waffles. Our waffles will satisfy your taste buds and keep you going as an afternoon snack, during your favorite activity or go great with your cup of coffee or tea. The Original Energy Waffle For years, similar waffles have been sold on street corners throughout Europe and eaten by professional cyclists, so we decided to create our own by sandwiching honey between two thin waffles. Honey Stinger Waffles are easy to digest, certified organic and available in a single-serving wrapper. When to Consume Honey Stinger Waffles are the perfect snack to help you prepare and perform for all activities. The energy in waffles is released immediately and absorbed at a steady rate, which delays muscle fatigue and gives your body the power to achieve your goals. With the right balance of delicious honey-powered carbs, you’ll be counting the minutes until it’s time for the next one. Nature's Energy Source Utilizing an ingredient engineered by nature as opposed to in a laboratory has its benefits, like higher quality and no additional flavoring or coloring. We use honey, a natural form of energy and antioxidants, as the main carbohydrate source for all products. Research in endurance athletes has proven that a mixture of carbohydrates is better tolerated by the body, prevents fatigue and enhances performance more than a single carbohydrate form.

Created for daily use before and during training and competition, the new GU Energy Stroopwafel delivers all the nutrients needed to power your performance: quality carbohydrates (immediate and long-lasting energy from complex and simple carbohydrates), essential amino acids (prevent mental fatigue and repair muscle damage during long-duration activities), and electrolytes (replenish what’s lost when you sweat). The Stroopwafel is made with a layer of delicious syrup between two thin wafers, and it’s individually packaged to make it portable and easy to take on a ride or run.

Fuel for Every Day A thin layer of honey sandwiched between two thin waffles. Our waffles will satisfy your taste buds and keep you going as an afternoon snack, during your favorite activity or go great with your cup of coffee or tea. The Original Gluten-Free Waffle For years, similar waffles have been sold on street corners throughout Europe and eaten by professional cyclists, so we decided to create our own by sandwiching honey between two thin waffle wafers. Honey Stinger Gluten-free Waffles are the first product of their kind that's certified gluten free and available in a single-serving wrapper. When to Consume Honey Stinger Waffles are the perfect snack to help you prepare and perform for all activities. The energy in waffles is released immediately and absorbed at a steady rate, which delays muscle fatigue and gives your body the power to achieve your goals. With the right balance of delicious honey-powered carbs, you’ll be counting the minutes until it’s time for the next one. Nature's Energy Source Honey is rich in carbohydrates, making it ideal fuel for working muscles. When eaten before activity, it is released into the system at a steady rate throughout the activity. Helps muscles stay nourished longer during exercise and delays fatigue. Research shows ingesting a combination of carbohydrates and protein immediately following exercise refuels and decreases muscle soreness.

Clif Bars are a delicious source of healthy energy and are full of essential vitamins and minerals. Made with high-quality, organic ingredients, Clif Bars are a perfect go-to food whether you’re on the bike or just need a quick snack at the office. They contain 10 grams of protein and are made with real fruit, nuts, and whole grains. They contain no hydrogenated oils or artificial flavors.