$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Carry the essential roadside/trailside tools with the MSW Tool Hugger Kit. The Kit includes all the basics for quick repairs: CO2 cartridges, inflator head, tire levers, mini tool, and patch kit. Bring along your own tube and roll them all up in the Tool Hugger Wrap, which attaches to standard saddle rails, or just toss it into a jersey pocket. - Durable Cordura outer layer - Seven elastic tool compartments - Hook and loop closures
$19.99 - $24.99
A simple and reliable twist-to-inflate system, the Windstream Twist inflator head works with all 3/8" threaded inflation canisters — but with a twist. With no spring on the head, airflow is controlled by twisting the cartridge rather than pushing. Auto seals when not engaged. - Compact, lightweight design fits in tight spaces - Press-on for both Presta and Schrader valves - Compatible with 3/8” threaded cartridges - Rotate CO2 cartridge to regulate inflation - Kit includes CNC-machined aluminum inflator head with a green finish for better visibility
Threaded 16g CO2 cartridges for use with all Lezyne CO2 inflators. It inflates 700c road tire to 120psi (8.3bar) or one 26” MTB tire to 30psi (2.1bar). Sold in packs of five.
A new All-Mountain standard. Lezyne's threaded 25g CO2 cartridge for use with most Lezyne CO2 inflators. It inflates one large MTB tire (26” x 2.5”) to 40psi (2.8bar).* Sold in packs of five.
$49.99 - $54.99
Lezyne's Alloy Drive mini-pump quickly inflates your tires so you can get back on your bike. Its CNC-machined aluminum barrel and handle help you get pumped up to 90 psi in a flash. And, making your inflation experience even easier is a Presta and Schrader compatible Air Bleed System Flex Hose that stows inside the handle when not in use.
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge
$49.99 - $54.99
Lezyne's lightweight, powerful Pressure Drive mini-pump quickly inflates your tires so you can get back on your bike. Its aluminum barrel and handle help you get pumped up to 120 psi in a flash. And, making your inflation experience even easier is a Presta/Schrader-compatible hose that stows inside the handle when not in use. - Small: 170mm, 89g - Medium: 216mm, 102g *Note: Blue color not available in the United States
Genuine Innovations' AirChuck Elite offers Push-To-Inflate technology for fast, easy & controllable single-handed CO2 bicycle tire inflation! • Cartridge compatibility: 12, 16, 20, 25 gram threaded CO2 cartridges & Big Air! (not 45-gram cartridges) (each sold separately) • All metal aluminum design • Easy to use and fully controllable • Push-to-Inflate technology • Works with both Presta and Schrader valves • Includes one 16 gram and one 20 gram threaded CO2 cartridge • Weight: 16 grams
The most intuitive CO2 inflator on the market. All you have to do is twist your favorite CO2 cartridge into the HammerHead, and at the push of a button, you're back on the trail. As an added bonus, the HammerHead automatically detects your valve type for instant valve attachment while the trigger head leverages our patented push-to-inflate technology. - Easy and controllable inflation - Push-to-inflate technology - Auto detect head for instant Presta or Schrader valve attachment - Lightweight, compact design - Weight: 26 grams Includes: (1) HammerHead inflator (1) threaded 20 gram CO2 cartridge
Easy to use, easy to control and affordable. The Mircoflate Nano gives you the best bang for your buck when it comes to quality and ease of use. Simply thread on your favorite CO2 cartridge, twist the cartridge off slightly to engage inflation and tighten it back on to shut it off. Petite power! - Compact and nearly indestructible - Easy to use and fully controllable - Patented twist-to-inflate technology - Press on to both Schrader and Presta valves - Compatible with 16 gram, 20 gram and 25 gram threaded CO2 cartridges Product includes: (1) Microflate Nano inflator head (1) threaded 20 gram CO2 cartridge
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
The Digital Shock Pump gives you an exact pressure setting to make suspension and seatpost setup easier and repeatable every time. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - LCD display panel - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder and foldable hose
High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose
A reliable floor pump featuring a durable steel barrel, an auto-select head, and a stable base. Fresh air for your tires Nothing slows a cyclist down like an inappropriate amount of tire inflation. Loaded with features like a stable, tip-resistant base, a durable steel barrel, and an auto-select head, the Charger stands ready whenever your tires need a little boost. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy-to-read 3-inch base-mounted gauge - Max pressure 160 psi (11bar)
A digital shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed-off so you can easily adjust your shock pressure. Digitally dialed Dialed suspension is crucial to a great ride. Upgrading to the Bontrager Digital Shock Pump will make it easy to dial-in front and rear suspension with confidence. It features a large, easy-to-read digital gauge that displays PSI/bar/kg/cm2, a bleed valve for fine-tuning pressure, and a thread-on design that quickly attaches for a reliable, secure connection. Product details: - Easy-to-read gauge accurately reads up to 300 PSI (20 bar) - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks - Displays PSI, bar, or kg/cm2 - Replaceable CR2023 battery Features: Easy-to-read digital gauge A broad, back-lit digital gauge provides accurate pressure readings to a maximum of 300psi (30 bar) Minimize connection bleed off Fast and secure connection minimizes bleed off when connecting and disconnecting Bleed valve to fine tune suspension The bleed valve allows you to release small amounts of pressure to fine tune your suspension to exactly where you want it Specs: - Pump type: Suspension - Valve: Schrader - Gauge type: Digital - Max pressure: 300psi - Frame mounted: No - Dimensions: 292mm (11.5") - Hose length: 25.4cm (10")
A versatile floor pump that allows for easy transition between high volume and high pressure settings. A pump for road and MTB The Dual Charger Pump is versatile floor pump with multiple pressure settings that let you easily inflate high-pressure road tires and larger volume hybrid and MTB tires. A quick flip of the switch moves between settings, making it perfect for riders who own both a road and mountain bike. Product details - Steel construction and replaceable internals provide long-term durability - Auto-select head instantly fits both Presta and Schrader valves - Large, stable base minimizes tipping - Easy to read 4-inch base-mounted gauge - Base-mounted switch allows for easy transition between high volume and high pressure settings - High volume setting allows for quick inflation - High pressure setting allows for easy inflation as PSI increases - Max pressure 160 psi (11bar)
$21.99 - $27.99
Use Bontrager's Presta Valve Extenders with a deep section wheel and you'll always be able to keep things properly pumped. They must be used with a removable valve core tube.
For the perfect pressure A shock pump with an accurate, easy-to-read gauge and a thread-on design that minimizes bleed off so you can easily adjust your shock pressure. The perfect pressure takes precision. The Bontrager Shock Pump features a large, easy-to-read gauge for accurate readings, a bleed valve for pinpoint accuracy, and a thread-on design that quickly attaches to front and rear suspension shocks for a reliable, secure connection. - Easy-to-read gauge that is accurate to 400 PSI - Threaded design for a secure connection that reduces bleed down - Bleed valve reduces pressure in small increments - Suitable for use with front forks and rear shocks
$36.49 $72.99 50% Off
Travel-ready tubeless set-up TLR Flash Can makes setting up tubeless tires at home and on the road a breeze. This easily transportable air canister inflates with a traditional pump, and a quick flip of the lever instantly releases stored air for smooth tubeless tire seating. The TLR Flash Can is designed for efficient installation of tubeless ready (TLR) tires without the need for a compressor. Product details - Inflates tubeless ready (TLR) tires without a compressor - Holds up to 160PSI (11 bar) of air pressure - Inflate Flash Can with any Schrader compatible floor pump - A simple flip of the lever releases stored air - Unique 'flash charge' function rushes air into tire - Auto-select head instantly fits both Presta and Schrader valves Specifications - Pump type: Floor - Valve: Presta/Schrader - Gauge type: No gauge - Max pressure: 160psi - Frame mounted: No
A floor pump and a tubeless setup tool in one. Set to Charge for a pressurized chamber that makes at-home and on-the-fly setup of tubeless ready (TLR) tires a breeze. Tubeless setup made simple TLR Flash Charger is the single-pump solution for daily use and at-home tubeless setup. It functions just like a standard floor pump when set to 'Inflate'. Switching it to 'Charge' gives the ability to pressurize a chamber and 'flash release' the stored air in order to seat tubeless tires without a bulky air compressor. Plus, it has a broad, back-lit digital gauge that delivers accurate pressure readings all the way to 160 PSI. Product details - Dual-chamber design with Inflate setting allows for efficient use as a traditional floor pump - Set to Charge for a pressurized chamber that inflates tubeless ready (TLR) tires without a compressor - Digital gauge provides easy-to-read accuracy up to 160 PSI (recommended maximum) - Compatible with both Presta and Schrader valves - Included inflation accessories conveniently stored in handle
An update to our hugely successful digital shock pump, this new version retains the slanted gauge and exclusive bleeding system for accurate and consistent pressures, but adds a new display cover and is redesigned to be smaller and lighter. It's perfect for the glove box or backpack. - Slanted gauge for ease of use - Exclusive bleeding system - Smaller format and lighter package
Our Boundary 1.5HP is designed for the high pressure of road tires and is capable of reaching 120PSI / 8.3 bar. An extendable head means it's easier to pump, and the sealing lever doubles as a protective cover to keep it functioning no matter the conditions. An additional sleeve seals the barrel to prevent water penetration. - Alloy barrel and handle - High-pressure road optimized - Built-in extendable head
Our High Volume Boundary 1.5HV pump is designed for mountain bikers who need larger delivery of air for big tires. An extendable head means it's easier to pump, and the sealing lever doubles as a protective cover to keep it functioning no matter the conditions. The frame bracket has been optimized for recessed frame down tube. - High-volume construction optimized for mountain bikes - Innovative sealing lever doubles as protective head cover, protecting against water and dirt - Extractable head reduces the risk of damaging valve stem during inflation
The Boundary 2.0HP is a dedicated high-pressure mini-pump. Thanks to a tapered barrel, it can inflate a road tire in no time flat and comes with a retractable hose and a reversible Presta/Schrader head with sealing lever. - High-pressure road optimized - Built-in extendable head
Page 1 of 3 Next page